Gentech ED12.5KSE
Finance & Insurance Available in Store – Just Ask Us!
12 kVA / 1-Phase Standby Generating Set with Kubota engine, 90 litre
fuel tank and remote start/stop controller. Optional canopy available.
Continuous: kVA @ 0.8 pf. (Divide standby rating by 1.1). Available for continuous electrical output. There is no hour limitation. 10% overload is available 1 hour in 12. The generating set and this specification is designed for environmental conditions of up to 27°C, up to 152.4 m above sea level and up to 60% relative humidity. Ratings at 0.8 pf.
For ratings outside this range, please contact us.
Key start/stop with following meters:
Canopy No: CA (with Lift-off doors)
Noise Level @ 1m: 80dBA
Total Weight: 710 kg (including Genset)
Dimensions (L x W x H): 1750 x 780 x 1220 mm
***Exhaust protrudes 300mm above canopy.
Specifications
Power Rating: 12 kVA
Alternator Model: Crossley SLG Series
Engine Model: Kubota D1703
Engine Speed: 1500 rpm
Starter Voltage: 12
Frequency: 50
Cylinder No.: 3
Cubic Capacity: 1.647 L
Bore / Stroke: 87 x 92.4 mm
Compression Ratio: 23 : 1
Aspiration: Natural
Flywheel Max. Cont. Power: 15 kW
Combustion Air Flow: 1.1 m3/min
Cooling Air Flow: 40 m3/min
Heat Rejection to Cooling System: 12 kW
Exhaust Gas Flow: 2.2 m3/min
Exhaust Gas Temperature: 560 °C
Fuel Tank Capacity: 90 L
Approx. Fuel Consumption (1hr cont.): 4 L/hr
Approx. Fuel Consumption (1hr standby): 4.5 L/hr
Fuel Type: Diesel
Diam.: 1400 x 760 x 1250 mm (L x W x H)
Weight: 460 kg
Alternator Model: Crossley SLG Series
Engine Model: Kubota D1703
Engine Speed: 1500 rpm
Starter Voltage: 12
Frequency: 50
Cylinder No.: 3
Cubic Capacity: 1.647 L
Bore / Stroke: 87 x 92.4 mm
Compression Ratio: 23 : 1
Aspiration: Natural
Flywheel Max. Cont. Power: 15 kW
Combustion Air Flow: 1.1 m3/min
Cooling Air Flow: 40 m3/min
Heat Rejection to Cooling System: 12 kW
Exhaust Gas Flow: 2.2 m3/min
Exhaust Gas Temperature: 560 °C
Fuel Tank Capacity: 90 L
Approx. Fuel Consumption (1hr cont.): 4 L/hr
Approx. Fuel Consumption (1hr standby): 4.5 L/hr
Fuel Type: Diesel
Diam.: 1400 x 760 x 1250 mm (L x W x H)
Weight: 460 kg
BUILD SCHEDULE
Standby: kVA @ 0.8 pf These ratings are applicable for supplying continuous electrical power (at variable loads) in the event of a utility power failure. No overload is permitted on these ratings. Minimum output from alternators are peak continuous rated (as defined in 1SO 8528-3 @ 27°C. Annual hour limitation: 500 hours).Continuous: kVA @ 0.8 pf. (Divide standby rating by 1.1). Available for continuous electrical output. There is no hour limitation. 10% overload is available 1 hour in 12. The generating set and this specification is designed for environmental conditions of up to 27°C, up to 152.4 m above sea level and up to 60% relative humidity. Ratings at 0.8 pf.
For ratings outside this range, please contact us.
CONTROL SYSTEM
Standard Fitting: Starting is remote or local to the machine - close contacts to start, open contacts to stop.Key start/stop with following meters:
- Oil Pressure, Oil Temp, Motor Temp, Frequency, Volts and Amps
- Shut Down for low oil
- Emergency stop button
- Output circuit breaker
ACCESSORIES
- Muffler, stainless steel exhaust flex (20 kVA and above) and clamps, battery and leads, day fuel tank.
- Oil and Coolant (within engine).
- Circuit breaker and display for Amps, Volts and Frequency.
OPTIONS
- Mains failure control system instead of standard remote control system with mains failure relay, and static battery charger (mains supplied).
- Changeover contactors in separate cubicle.
- Constant potential (static) battery charger fitted to key start/stop system or remote start/stop system.
- Jacket Heater - Thermostatically controlled heater supplied and fitted to maintain engine coolant temperature at approximately 40°C.
Canopy Options
All W&C canopies are made out of galvanised steel and are powder coated to offer you weather protection and to prolong the life of your generator. Our canopies have a unique soundproof insulation for quieter performance and are designed for easy maintenance and transportation.Canopy No: CA (with Lift-off doors)
Noise Level @ 1m: 80dBA
Total Weight: 710 kg (including Genset)
Dimensions (L x W x H): 1750 x 780 x 1220 mm
***Exhaust protrudes 300mm above canopy.
