Hansa C30 Brush Chipper

Designed for professional use by arborists, parks & reserves, local bodies, orchards and hire centres.

FEATURES:

• Wide infeed opening 300 x 160mm (12” x 6½”). For foliage and brushy material, this wide infeed opening gives the chipper a capacity of a 10” to 12” machine with all the advantages of a 6” machine, e.g. Low weight and cost, and easy to manouvre.
• Vertical anvil Anvil positioned vertically (rather than horizontally) to reduce knife damage caused by stones and grit.
• Hydraulic pump Driven off the engine. Even if cutting disk is jammed, the feed roller can still be reversed for clearing the branch material. Infinitely variable speed.
• Clutch Manual clutch system for no load starting of the engine. Engine is pivoted for engagement. Simple and reliable.
• Outlet 360° rotating chute with deflector and a positive locking system. No tools required for adjustments.
• Jockey wheel Large solid wheel, height adjustable.
• Light System LED tail, brake and license plate lights, suitable for 12 or 24 volt system.
• Feed roller Pivot type spring tensioned, operates with less friction, moves forward and up to within 90mm of knives.
• Feed control bar Pull to feed, push for reverse. Speed is infinitely variable.
• Feed table Folds away and is locked when transporting the machine.
• Auto sensor feed Electronically monitors engine RPM and controls feed roller to suit. Auto feed is operator adjustable by push button, LCD screen displays engine RPM & hour meter. Auto reversing for quicker engine recovery. Feedroller jams are reversed and cleared automatically, eliminating manual reversing of feedroller if a blockage occurs.
• Finish Durable hyperloc powdercoated finish (Hansa green or optional colour of your choice).
• Warranty 12 month warranty (conditions apply).

The powerful hydraulic feed system of the Model C30 makes it easy to process any material. Its 6½” x 12” wide feed opening pulls bushy and twisted branches with forks into the machine without effort. You simply control the feedrate with the control bar and the rest is automatic with an optional electronic automatic sensor feed system.

Fuel efficiency is vastly increased by 50% with the 28.6HP Lombardini two cylinder air cooled diesel engine. With the 40% higher torque of this engine, wide feed opening and the option of auto sensor feed system, this machine has no problems chipping a full length 6” branch with all side branches attached.